background image

Safety and care advice

Important -

Please read these intructions fully before starting assembly

Note:

if required the next 

page can be cut out and used 
as reference throughout the 
assembly. Keep this page with 
these instructions for future
reference.

• Check you have all the 
components and tools listed on 
pages 3 and 4. 

Remove all fittings from the

plastic bags and separate them 
into their groups.

• Keep children and animals 
away from the work area, small 
parts could choke if swallowed.

• Make sure you have enough 
space to layout the parts before
starting.

• Do not stand or put weight 
on the panels, this could cause 
damage.

• Assemble the unit as close 
to its final position (in the same 
room) as possible.

• 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

   

 

 

 

   

   

 

 

 

 

 

 

   

 

• Assemble on a soft level 
surface to avoid damaging the 
unit or your floor.

• Parts of the assembly will be 
easier with 2 people.

• If using power tools, please 
follow the safety instructions 
supplied with the tools.

• We do not 
recommend the 
use of power drill/
drivers for inserting 
screws, as this 

could damage the unit. Only use
hand screwdrivers.

• 

Warning:

Before drilling, 

check the wall for hidden pipes 
and cables. 

• Dispose of all packaging 
carefully and responsibly.

• 

Warning:

 The unit weighs 

approximately 34kgs

Please lift with care.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

   

   

 

 

 

 

 

 

 

 

 

 

 

 

 

Recycling – the packaging materials for this product may 

be recycled through your local recycling centre. When you 

want to dispose of the product itself, please consider 

donating it to a local charitable organisation, otherwise 

recycle it through your local recycling centre.

Cleaning instructions

• 

This product has been 

manufactured using modern 
manufacturing methods and 
materials. With appropriate 
in-home care and mainte-
nance it will provide trouble 
free performances.

 

Many 

domestic multi-purpose 
cleaning agents are unsuitable 
for use on this product. 

The use of aggressive chemi-
cals can result in irreversible 
damage. Please follow these 
guidelines carefully.

USE only 5% soap, 95% 
water solution, wiping with a 
damp (not wet) cloth. Finally 
dry with a soft clean cloth. 

Dust with a soft clean cloth 
only. 

DO NOT USE wax furniture 
polish, abrasive or aggressive 
cleaners, bleach or hypochlo-
rate (chlorine) based cleaners, 
multi-purpose cleaners, 
dilutes, acetone, alcohol, 
solvent or similar products.

• From time to time check that 
there are no loose screws on 
this unit.

• This product should not be 
discarded with household 
waste. Take to your local 
authority waste disposal centre.

Care and maintenance

2

Summary of Contents for 1866968













Reviews: