manualshive.com logo in svg

Argos 033 3560 Series, Assembly Instructions Manual

Share
Download
Argos 033 3560 Series Assembly Instructions Manual Download Page 17

Assembly Instructions 

Step

 

17 

Lift unit up and 

locate drawers 

Step

 

18 

Fittings you will need for this step: 

(x4) 

I 

For this step we  

recommend you follow  

the helpful hints page  

on page 17. 

Fittings you will need for this step: 

16 

2nd HOLE 

I 

I 

I 

Warning:

2 people to lift.

Lift with care.

Locate the notch on

trim into

groove on left            and

right            ends.

Ensure the 

trims are positioned 

correctly.

To insert trims 

use a hammer, place a 

cardboard packing piece

between the hammer

and  trims to 

protect the  

trims.

Attach trims

9153

9154

Warning:

2 people to lift.

Lift with care.

9153

9154

(x2) 

Trims

Important: 

The drawers 

are left and right

handed so 

please ensure

these are

located as 

shown.

6846 

6845 

Your trims may have a 

protective film on. Please 

remove this after assembly

Turn unit over.

Summary of Contents for 033 3560 Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands