7
12
12
Step 7
Place a roof support bar (No. 11)
inbetween the framing on the
door side and plain side, aligning
with the top of gable. Mark the
position with a pencil.
Fix the roof blocks (No. 10) to the
door and plain panels in line with
the pencil mark and secure using
2x50mm screws per block.
Place the roof support on top of
the blocks and fix in place with
2x70mm screws per side.
*Repeat this process with the
remaining roof supports and
blocks.
18x50mm Screws
6x70mm Screws
Pre drill
hole
50mm
screw
Step 8
Attach the 2x eaves frames (No. 12)
to each roof (No. 7) using 3x30mm
screws per eaves frame.
*Ensure the eaves are flush to the
edges of the roof sheet.
*
For T&G roof options use the same
method as stated above ensuring the
eaves framing is flush with the edge
of the roof framing and screwed directly
through the eaves framing into the
roof framing and not into the T&G
boards.
12x40mm Screws
Pre drill
hole
30mm
screw
Step 9
Place the assembled roof panels
on to the building and secure as
shown in the illustration with
16x30mm screws
* Ensure the roofs are flush with
the sides of the building.
16x30mm Screws
Pre drill
hole
30mm
screw
a
a
a
a
a
a
a
Step 10
Secure the building to the
floor using 28x50mm screws.
*Ensure to screw through the framing
into the floor bearers.
28x50mm Screws
Pre drill
hole
50mm
screw
a
a
*If you have purchased the T&G roof and floor option ensure to fix the roof to
the building using 35x70mm screws following the same method outlined
above.
Internally
: Secure the roof panels together where they join using 5x50mm screws.
35x70mm Screws
5x50mm Screws
Pre drill
hole
70mm
screw
50mm
screw
10
11
70mm
screw
12
12
7
P 4
Please retain product label and instructions for future reference
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
