w w w . a r g o n a u d i o . c o m
Stream 2
18
3.1 Setup wizard
When Stream2 is started for the first
time, it runs through a setup wizard to
configure settings for date/time and
network. Once this has finished, the
system is ready to use in most modes.
Note: To change these settings later,
select
Menu >
System settings >.
To run the setup wizard again, select
Menu >
System settings > Setup
wizard
.
Select
Yes
to start the setup wizard.
If you choose
No
, the next screen asks
if you would like to run the wizard next
time Stream2 is started. The system
then starts without configuring
time/date and network settings and
enters the Main Menu.
Note: If power is removed while the
wizard is in progress, the wizard will
run again next time Stream2 is started.
