w w w . a r g o n a u d i o . c o m
iNet6+
55
11.2 Setting up the connection to the iNet3+
After you download the UNDOK Wireless Device Remote Control application, you must set up a connection between the
Phone and the iNet3+.
To do this, follow these steps:
1. On the iNet3+, navigate to Menu >
Main menu > System settings > Network > Keep network connected
,
and select
YES
.
The network connection now stays on when the device is in standby mode. This setting is retained in the device’s
memory after it is switched off and on again.
2. Set the Phone to use the same network access point as the iNet3+ as follows:
a. Select
Settings > Wi-fi
.
b. Choose the network of the iNet3+. from the list.
c.
If asked for a PIN code the default PIN code is 1234
Notice
: the feature: Set up audio system” in the UNDOK app only applies for Devices without display (iNet3+ has a display so
setup is done directly on the iNet3+)
