w w w . a r g o n a u d i o . c o m
iNet3+v2
17
3. Getting started/setup
Although the Argon iNet3+v2 is sophisticated, getting started is simple. To play DAB or FM radio,
all you need is a power source (a 100-240 V mains supply).
For Music Player mode, you need a wired/wireless Ethernet network and a UPnP music server
(e.g. a PC).
For Internet-connected modes such as Internet radio, you also need a broadband Internet
connection.
To set up the iNet3+v2:
1.
Place iNet3+v2 on a suitable shelf or table
2.
Connect the power adaptor between iNet3+v2 and the mains supply.
3.
To receive broadcast radio (DAB and FM), extend the telescopic antenna.
The setup wizard starts.