w w w . a r g o n a u d i o . c o m
iNet2+
18
1.
Place iNet2+ on a suitable shelf or table
2.
Connect the power adaptor between iNet2+ and the mains supply.
3.
To receive broadcast radio (DAB and FM), extend the telescopic antenna.
The setup wizard starts.
3.1 Setup wizard
When iNet2+ is started for the first
time, it runs through a setup wizard to
configure settings for date/time and
network. Once this has finished, the
system is ready to use in most modes.
Note: To change these settings later,
select
Menu >
System settings >.
To run the setup wizard again, select
Menu >
System settings > Setup