argon audio iNet 1, Quick Start Manual, Page: 38 / 54

Wireless Internet & FM Radio
Configuring the Argon iNet1 to only use a wired
Ethernet connection
From the radio’s ‘Network config’ menu, select ‘Wired/Wireless’. This menu will present you
with three options: ‘Wireless Only’, ‘Wired’ and ‘Auto’. Selecting ‘Wired Only’ will cause the
Argon iNet1 to reboot and then only use its Ethernet connection to communicate with the
network. The radio will also disable its wireless network capabilities.
Configuring the Argon iNet1 to only use a Wi-Fi
connection
Selecting the ‘Wireless Only’ option from the ‘Wired/Wireless’ menu will cause the radio to
reboot and then only use its Wi-Fi connection to communicate with the network. The radio
will also disable its Ethernet connection.
Configuring the Argon iNet1 to use either an Ethernet
or a wireless connection
Selecting the ‘Auto’ option from the ‘Wired/Wireless’ menu will cause the Argon iNet1
to reboot and then attempt to establish an Ethernet connection, if it is available, to
communicate with the network. Otherwise, the Argon iNet1 will attempt to establish a Wi-Fi
connection to the network.
38