w w w . a r g o n a u d i o . c o m
DAB3+
10
3.1.1 Scanning stations in DAB mode
There are three ways to scan for stations:
•
Automatic full scan
•
Quick scan
•
Manual scan
To do an automatic full scan:
1. Press and hold the
Autotune
button for 3 sec. to begin automatic scanning of all stations.
This may take a few minutes, during which you will see the displays in the sequence below.
When a station is detected, it starts to play immediately.
2. To preview another station, turn the
Tuning
knob until the name of another station appears.
3. Press the
Tuning
knob to select and listen to the new station..
When a station is unavailable or no signal is present, one of the messages similar to Figure 3-7 appears..
