w w w . a r g o n a u d i o . c o m 3
7460
/
50A
Running-in period
We recommend a running-in time of your new Argon
7460A/7450A loudspeakers of approximately 15-20 hours at
normal listening level before you decide on the final
positioning of the loudspeakers. During the running-in time
the drive units will settle in and perform as intended.
Connecting your loudspeakers
We recommend that you read the manual of your other
audio products carefully before connecting your
loudspeakers. Please switch off all equipment when
connecting your loudspeakers.
The speaker binding posts on the terminal accepts wire up
to Ø 4mm or cables with banana plugs.
Make sure that positive terminal binding posts on the
Passive speaker ( and colored red) are connected
to the positive output terminal binding posts on the Active
speaker and that the negative terminals on the Passive
speaker (marked – and colored black) are connected to the
negative output terminal on the Active speaker.
Now you can connect the audio source you want.
(read more about this on page 4 and forward).
.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Argon 7460A/7450A cabinets, the cabinet surface usually
only requires dusting or cleaning with a damp soft cloth
(only use cold clean water).
Avoid touching the drive units, especially the tweeter, as
damage may result.
Environmental information
Argon 7460A/7450A loudspeakers comply with international
directives on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and the
disposal of Waste.
Electrical and Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the products must
be appropriately recycled or processed in accordance with
these directives.
Safety instructions
Please store this instruction manual for future reference.
Do not use this product near water or moisture. Clean only
with a dry cloth. Unplug this product from the wall outlet
before cleaning. Place the unit on a solid surface. Do not
block any ventilation openings. Do not put it in a closed
bookcase or a cabinet that may keep air from flowing
through its ventilation openings. Do not install near any heat
sources, such as radiators, heat registers, stoves or other
appliances that produce heat. Protect the power cord from
being walked on or pinched, particularly at plugs and the
point where they exit from the product. Servicing is required
when the product has been damaged. Do not attempt to
service this product yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
Please contact the manufacturer to be referred to an
authorized service center near you. To prevent risk of fire or
electric shock, avoid over loading wall outlets, extension
cords, or integral convenience receptacles. Do not let
objects or liquids enter the product. Use proper power
sources. Plug the product into a proper power source, as
described in the operating instructions or as marked on the
product.