NITROGEN 231A/231B: 8. Saddle adjustment
8.1 Install the saddle on the rocker (3d)
and tighten the rail clamp (3e) up to
6Nm using the half-moon bolt (3k).
8.2 Adjust the angle and the offset
of the saddle by hand tightening the
thumb screw (3j).
8.3 The rocker (3d) can be flipped to
change the saddle offset (+ / - 5mm).
8.4 The seatpost head base (3b)
can also be flipped to achieve a TRI
position. First remove the half-moon
bolt (3k) and the thumb screw (3j),
remove the top and bottom clamp
(3d & 3e) to get access to the 2 head
base screw (3c). Unscrew the screw to
remove the head base (3b) and flip it to
change the offset.
22
3a
3d
3f
3c
3c
3h
3k
3b
3j
3g
GREASE
LOCTITE
GREASE
LOCTITE
3e
6Nm
3i
4 Nm