20
The minimum saddle height should be adjusted
according to the rider`s individual body size. He
should be able to cycle without it interfering with
his health or safety.
The seat post's maximum extension should allow
it to remain securely clamped into place by the
bolt.
Ask your specialist retailer for advice on these
last two points.
Children and people who feel inse-
cure when riding should be able to
touch the ground with their toes.
Otherwise, when stopping you run the risk of
falling and serious injury.
Adjusting the saddle tilt
If you have adjusted the saddle height, the sad-
dle inclination should be checked and adjusted
as well. The surface of the saddle should always
be approximately parallel to the ground. You can
perform this adjustment when the seat clamp
bolts of the seat post have been undone.
Patented seat post with two-screw locking mechanism
7,5 cm
STOP
Patented seat post with one-screw locking mechanism
Attachment with seat clamp
Before you start riding, please test
to see if your seat post
and seat are secure. To do this,
grasp the saddle at the front and back and
attempt to turn it. It should not move.
Suspension seat post
For information concerning the in-
stallation and service of threaded
and telescopic seat posts, read the
manufacturer’s service manual.
If your pedelec is equipped with an integrated
seatpost i. e. a seatpost with an integrated fixture,
please read the enclosed instructions regarding
operation and adjustment from the component
manufacturer.
Integrated Seatpost
* see page 39
Summary of Contents for E-Gravel
Page 58: ...54...
Page 62: ...Cachet du revendeur...
