2. Front brake installation
1 . Install the brake as shown in the
diagram
- Install the spring in the middle
hole of the fork insert
- It is important not to mix the springs
of the front and rear brakes
- Respect the color code: the spring
must be installed on the pivot of the
same color
- You can configure the brake pads
spacing with 1mm , 2mm or
no spacers behind the brake pads
depending of the rim width you are
using
GREASE
GREASE
8Nm
8Nm
13b
13a
13d
13c
13h
the short end of the spring
should be positioned in
the notch of the spring
tensioner
3h
13e
13i
13c
13f
13g