X3 Multisplit Cassette
IU
11
careful not to let the swing motor lead wire get caught in the sealing material.)
③
.
Screw the 4 hexagon head screws under the latches in about 15mm. (The
panel would rise)
④
.
Adjust the panel by turning it toward the direction pointed by the arrow as
shown in Fig. 2.13, so that the adjust board connect the ceiling well.
⑤
.
Tighten the screws until the thickness of the sealing material between panel
and indoor unit reduced to 5-8mm.
Fig. 2.13
Notes:
①
.
Improper screwing of the screws may cause the troubles shown in Fig. 2.14.
