© ARGO S.A.
Nasza oferta w internecie: www.argo.pl
TROUbLE SHOOTING:
A) if your pouch is not sealed, temperature is either too cold or there is not a big enough
margin.
B) if your pouch is cloudy the temperature is too low or the pouch to full.
C) if your pouch is wavy the temperature is too hot.
D) if there are spots on the pouch. Glue has seeped from pouches on to rollers.
Run a sheet of paper through…..continue until clear.
E) if your pouch has wrapped around rollers…..Remove using Jam Release / Rev.
Clean rollers with a plain sheet of paper (preferably 120gsm or thicker).
bE CAREFUL:
if changing to a thinner pouch type allow time for the machine to cool to
the correct temperature. if changing from hot to cold lamination make sure machine is
completely cooled.
SAFETY NOTICE
• Read all instructions before use
• Do not leave cable where other may trip
• Do not attempt to open casing
• Do not use if wet
• Switch off and unplug when not in use
• Do not cover the heat vents when in use
• Do not touch the heat vents when the machine is working
• Do not put any items through the heat vents.
• Do not use if machine, cable, or socket is damaged
• Wait for cooling down the pouch, it may be hot
TECHNICAL DATA
Voltage ................................................................................................................ 220-240 V
Power consumption .................................................................................................. 680 W
max width laminating ....................................................................................... 330 mm/13’’
max thickness laminating .................................................................................. 2x250 mic
Weight ..................................................................................................................... 4.3 KGS
NOTE ON ENVIRONMENTAL PROTECTION:
After the implementation of the European Directive 2002/96/EU in the national
legal system, the following applies: Electrical and electronic devices may not be
disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the
end of their service lives to the public collecting points set up for this purpose
or point of sale. Details to this are defined by the national law of the respective
country. this symbol on the product, the instruction manual or the package indicates
that a product is subject to these regulations. By recycling, reusing the materials or other
forms of utilising old devices, you are making an important contribution to protecting our
environment.
RoHS
