Argo WALLNER JP 820S, Instruction Manual

Page: 14 / 22

14
EN
© ARGO S.A. www.argo.pl
PROBLEM SOLVING
problems checklists solutions
No operation The power plug is properly
inserted to main supply?
Fully put the power plug to the
outlet.
Switch is set at „I” position? Set switch to „I” position for
operation.
Switch at „l” position but power
light off.
Check basket is out of stand.Put
basket back to stand.
Basket at stand but power light
off.
Basket should be put into
stand to trigger the safety
interlock switch for operation.
No operation when insert paper? Paper should be inserted to
trigger the sensor at center.
Checked above but no operation
and no power light.
Send back to your local service
for repair.
No operation after
long time operation
Power lamp is on? Unplug the machine from
main supply. Allow to cool
down to room temperature
and resuming operation.
Stop at shredding Machine is continuously
shredding for a long time?
Unplug the machine from
main supply. Allow to cool
down to room temperature
and resuming operation.
Excess squeaking
and rubbing noise
Without oiling to the cutting
system periodically.
- Squeaking and rubbing noise at
shredding.
Perform the cutter oiling
instruction to lubricate the
cutting system.
Paper jam - Exceeding the shredding
capacity
- The paper is not fed squarely
into the feed opening.
Set switch to „R” for reverse
running and frees excess
paper. Then set to „I” for cutting
the remainder of paper left in
the cutting system. If serious
jim occurred, send back to
local service for repair.
MALFUNTION / MAINTENANCE
If any faults should appear, please pass the machine along with the warranty card to the
seller or closest authorised dealer. The machine might be passed futher, thus the user sho-
uld maintain the original and complete packaging. In cases when the machine is passed
for repair in a not original or incomplete package, the risks of futher damages that might
arise in transportation are on the user's side. Thus, in such a case, it is in the user's best in-
terest to make the best possible replacement packaging.