EN
8
H
The unit can be placed on a balcony or hanged
to the wall using the support bracket kit (not sup-
plied).
I
Drill the holes and fix the support to the wall using
the rawl plugs.
L
Remove the plastic plugs from quick couplings,
connect the couplings by hand, then tighten using
the torque wrenches (tightening torque 150 ÷ 165
kgcm).
M
Connect the condensate plastic tube and the
electric connector.
N
Fix the coupling cover of the outdoor unit and seal
the hole in the wall around the flexible tube.
G
Insert the flexible tube into the hole drilled in the
wall. Place the unit against the wall, if necessary,
adjust the four antivibration supports
in order to
keep the unit levelled.
NOTES:
• The four antivibration supports are rubber
made and they could mark the floor; in this
case the application of proper material under
the support is recommended or use the sup-
plied felt pads.
TEST OFF
ON
When you assemble the outside unit, follow the
described succession: first, connect the pipes
for frigorific connection, then the electric con-
nector.
WARNING
• When you move the unit,
never tilt it, to avoid dam-
aging the floor.
