16
V 05/20
FAN SPEED BUTTON
This purifier has 5 fan speeds. Under working status, touch the button
to select the fan speed, each time this button is
pressed the speed changes circularly in the following sequence: 1 -> 2 -> 3 -> 4 -> 5
Under any working mode, press
to switch to the manual mode and then adjust the desired fan speed.
TIMER BUTTON
This function van be operated only on EWPE SMART App on smartphone. When the Timer function it’s active on the
App, the icon
will light up on the control panel, once the set time has been reached, the appliance will switch on.
WIFI SETTING
When turning on the unit, press
for 2 seconds to reset Wifi.
Wifi icon will flash and it enters into Wifi configuration status. Wifi configuration must be operated on the EWPE SMART App
installed in smartphone, follow the configuration instructions indicated in manual.
The device includes the radio transmitting module whose CMIIT ID is 2018DP1940.
CHILD LOCK SETTING
Press
on EWPE SMART App on smartphone to turn on or turn off the child lock.
TURN OFF THE UNIT
Under working status, press
and the appliance will enter in Stand-by mode.
Under working status, if Timer function on App EWPE SMART it’s activated, when the time is reached, the unit will enter
in Stand-by status.
FILTER REPLACEMENT INDICATOR
When the filter needs to be replaced, the icon
flashes to remind the user to replace the filter. Composite filter must be
purchased from an authorized service center, for the installation please refer to “Operations before to put in use”.
After the filter replacement, connect the power cable to the power.
Hold button
for 2 seconds to reset it, the appliance will enter into Stand-by status. Touch
to turn on the purifier.
