14
V 01/15
CLEANING AND MAINTENANCE
MAINTENANCE OF THE AIR PURIFIER’S OUTER SURFACE
Warning
Always pull the air purifier's plug out of the power socket before cleaning it, to prevent electric
shocks or malfunctions.
Warning
Do not wet or immerse the air purifier in water, as this may cause electric shocks.
Use a damp and soft cloth to clean the outer surface of the air purifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage
the surface or colour of the casing.
MOUNTING AND REASSEMBLING THE FRONT PANEL AND FILTERS
1. Grip the lower part of the front panel and pull it
towards you. When the front panel detaches, the
appliance switches off automatically.
2. After removing the front panel, remove the filter
unit. Use both hands to pull the filter support towards
you. Clean the pre-filter using a vacuum cleaner or
wash it with clean water at a temperature below
40°C. DO NOT USE ALCOHOL, BENZENE OR OTHER
AGGRESSIVE PRODUCTS.
3. Remove the HIMOP filter locking device, by
pressing upwards the tabs on the front part and
pulling the fabric tabs towards you.
4. Remove the activated carbon filter.
5. Reinstall the filters.
CLEANING
1. Cleaning the casing.
Use a damp and soft cloth to clean the outer surface of the appliance.
Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or
brushes: these may damage the surface or colour of the casing.
Remove stains using lukewarm water with a little neutral detergent.
Do not pour water onto the air purifier to clean it, as this may damage the internal components or cause a
short circuit.
Activated
carbon
filter.