![Argo K70N142T Installation Instructions Manual Download Page 35](http://html1.mh-extra.com/html/argo/k70n142t/k70n142t_installation-instructions-manual_2967528035.webp)
15
LENGTH, SIZE WIRES AND DELAYED FUSE •
LUNGHEZZA, SEZIONE CAVI E FUSIBILI RITARDATI • LONGUEUR,
SECTION CABLES ET FUSIBLES RETARDES •
KABEL-LÄNGE UND QUERSCHNITT UND TRÄGE SICHERUNGEN
• LONGITUD, SECCION DE CABLES Y FUSIBLES DE ACCION RETARDADA
SEE INSTALLATION INSTRUCTIONS OF OUTDOOR UNIT
V. ISTRUZIONI DI INSTALLAZIONE UNITA' ESTERNA
V. NOTICE D'INSTALLATION UNITE EXTERIEURE
SEHEN SIE INSTALLATIONSANLEITUNGEN VON AUSSENEINHEIT
VER INSTRUCCIONES DE INSTALACIÓN DE LA UNIDAD EXTERIOR
EG
I
F
D
E
WIRING DIAGRAM •
COLLEGAMENTI ELETTRICI • BRANCHEMENTS ELECTRIQUES •
ELEKTRISCHE ANSCHLÜSSE • CONEXIONES ELECTRICAS
EG
Connecting wire B (SHIELDED):
Bipolar electric shielded wire; size and length of the suggested electric wire are showed in the installation
instructions of outdoor unit. The wires have not to be lighter than Mod. H05VVC4V5-K (according to CEI 20-20
CENELEC HD21).
Connecting wire C (with ground conductor):
Multipolar electric wire; size and length of the suggested electric wire are showed in the installation instructions
of outdoor unit. The wires have not to be lighter than Mod. H07RN-F (according to CEI 20-19 CENELEC HD22).
Make sure the length of the conductors between the fixing point and the terminals allows the straining of the
conductors L, N before that of the grounding.
Cavo di collegamento B (SCHERMATO):
Cavo elettrico bipolare schermato; la sezione e la lunghezza del cavo elettrico consigliato sono indicate nelle
istruzioni di installazione dell’unità esterna. Il cavo non deve essere più leggero del tipo
H05VVC4V5-K
(secondo
CEI 20-20 CENELEC HD21).
Cavo di collegamento C (con conduttore di terra):
Cavo elettrico multipolare; la sezione e la lunghezza del cavo elettrico consigliato sono indicate nelle istruzioni
di installazione dell’unità esterna. Il cavo non deve essere più leggero del tipo H07RN-F (secondo CEI 20-19
CENELEC HD22).
Assicurarsi che la lunghezza dei conduttori fra il punto di fissaggio del cavo ed i morsetti sia
tale che i conduttori attivi si tendano prima del conduttore di messa a terra.
I
C
B
TP1
TP2