Argo Infrared Remote Controller for High-Wall fan coils User Manual Download Page 2

Preface 

For correct installation and operation, please read all instructions carefully. Before 

reading the instructions, please be aware of the following items: 

(1) For  the  safe  operation  of  this  unit,  please  read  and  follow  the  instructions

carefully. 

(2) During  operation,  total  capacity  of  indoor  units  should  not  exceed  the  total

capacity of outdoor units. Otherwise, poor effect of cooling or heating may result. 

(3) Direct operators or maintainers should well keep this manual.
(4) If this unit fails to operate normally, please contact our service center as soon

as possible and provide the following information: 

1) Content on the nameplate (model number, cooling capacity, production code,

ex-factory date).

2) Malfunction details (before and after the malfunction occurs).

(5) Each unit has been strictly tested and proved to be qualified before ex-factory.

In  order  to  prevent  units  from  being  damaged  or  operating  normally  because  of 
improper disassembly, please do not disassemble the unit by yourself. If you need to 
disassemble  and  check  units,  please  contact  our  service  center.  We  will  send 
specialists to guide the disassembly. 

(6) All graphics in this manual is only for your reference. For sales or production

reasons, these graphics are subject to change by manufacturer without prior notice. 

Summary of Contents for Infrared Remote Controller for High-Wall fan coils












Reviews: