Argo HP 2108, Instruction Manual, Page: 5 / 8

5
EN
© ARGO S.A. www.argo.pl
Wallner HP 2108
Wire Binding macHine
1. Paper supporter
2. Apothem
3. Margin control
4. Hooks
5. Handle
6. Wire pressing groove
7. Paper entry
oPeration guide
Place the machine on a stable and safe place before using.
PuncHing and Binding oPerations
1. Adjust the margin control (3) according to the text's size.
2. The apothem (2) arrowhead should be deed against the place of “punch” when it is
punching.
3. Insert the text, then press the handle (5) to punch. Put it up to take out the text.
4. Put the wire comb to the hook (4), ring placket should move forward.
5. Insert the wire ring to the text with covers.
6. Put the text which is hung with wire comb to the wire pressing groove (6), adjust the
apothem (2) to the corresponding position comparable with the wire comb's size,
press the handle (5) to make the wire comb close, then take out the text, the binding
is over.
1
4
6
7
5
3
2