18
EG
HOW TO DISCONNECT AND/OR REMOVE EMIX TANK UNIT
How to disconnect the refrigerant circuit
In case of Emix Tank is connected to a normal indoor unit port, (for example with G30 or G42) the unit must be discon-
nected exactly as any other indoor unit. On the outdoor unit, electrically disconnect the reversing valve to force the
system in cooling.
In case of Emix Tank is connected to the Emix port and by any reason it has to be disconnected and replaced, the installer
has to do this procedure using a refrigerant recovery unit:
•
close the valves of Emix port that connect Emix Tank to outdoor unit;
•
connect the refrigerant recovery unit to one of the two valves;
•
recover the refrigerant inside the copper pipes and Emix Tank unit;
•
disconnect Emix Tank;
•
reconnect another Emix Tank unit;
•
make the vacuum;
•
restore the refrigerant from recovery unit to the pipe and Emix Tank unit;
•
disconnect the recovery unit;
•
re-open the valves of Emix port that connect Emix Tank to outdoor unit.
In case of Emix Tank is connected to the Emix port and by any reason it has to be removed defi nitively, the installer has
to do this procedure using a refrigerant recovery unit:
•
close the valves of Emix port that connect Emix Tank to outdoor unit;
•
connect the refrigerant recovery unit to one of the two valves;
•
recover the refrigerant inside the copper pipes and Emix Tank unit;
•
disconnect Emix Tank;
•
reconnect the bypass disconnected during the fi rst installation;
•
disconnect the recovery unit;
•
make the vacuum on the bypass;
•
re-open the valves of Emix port that connect Emix Tank to outdoor unit;
•
switch on the outdoor unit in cooling mode;
•
recover the refrigerant inside the system connecting the recovery unit to one of the liquid valve of indoor units or to
the pressure valve of the inlet tube;
•
disconnect the recovery unit.
How to empty the water tank
In case Emix Tank has to be removed or replaced, proceed as
follows to empty the water tank:
•
close the water inlet valve of Emix Tank;
•
open the sinks’ taps of users connected to Emix Tank. Al-
ternatively, open the vent valve placed on the top of the
tank;
•
connect to tube 1 (see fi gure) a discharge pipe for the water
contained in the tank;
•
the water will come out from the tank through the connect-
ed tube.
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE 2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste.
It must be taken to special local community waste collection centres or to a dealer providing this service.
Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment
and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled
to obtain significant savings in energy and resources.
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.
1