V 06/11
11
TO CANCEL ALL THE TIMER AND TEMPERATURE SETTINGS, PRESS THE CANCEL KEY (4).
Now you can make new settings as desired.
N.B.
IF THE LEDS ARE FLASHING, CHECK THAT THE CONTROL IS PROPERLY CONNECTED TO THE BLANKET.
PRESS THE CANCEL KEY (4) TO STOP THE LEDS FLASHING, THEN MAKE THE SETTINGS AS DESIRED.
IF THE LEDS DO NOT STOP FLASHING, DISCONNECT THE BLANKET FROM THE POWER SOCKET AND CHECK
ITS POWER CORD FOR DAMAGE.
IF THE LEDS KEEP ON FLASHING, STOP USING THE BLANKET AND HAVE IT CHECKED OVER BY A QUALIFIED
SERVICE CENTRE.
IMPORTANT - If you intend to use the blanket for a long period of time, set the control to its minimum settings.
HOW TO CLEAN THE ELECTRIC BLANKET
Comply with the instructions indicated in the manual and on the blanket’s label.
Failure to observe these instructions may irreparably damage the electric blanket and constitute a hazard for those
handling the blanket.
Always remove the plug from the socket and leave the electric blanket to cool before cleaning, folding or storing it.
Do not cool the blanket unnaturally with any means, whether liquid or gaseous.
If the blanket is clean, it can be placed in its original box and stored in a dry place.
Clean the electric blanket with the aid of a damp cloth, or with water and a delicate detergent. Leave to dry before
using it or putting it away.
Do not dry clean. Dry cleaning may damage the heating elements.
Do not use industrial solvents such as benzene, kerosene or similar solvents.
Do not bleach.
The electric blanket can also be machine-washed using delicate programmes, at a maximum temperature of 40° with
the aid of neutral detergents. However, hand-washing/cleaning prolongs the life of the electric blanket.
For washing the blanket in the washing machine, disconnect the control and place the electric blanket in a closed mesh
bag.
The controls must never be immersed in water.
After washing is completed, remove the electric blanket from the mesh bag and hang it to dry while fully open. Do not
use pegs to hang it.
Do not tumble dry.
Do not iron.
Do not switch the blanket on to dry it - leave it to dry naturally.
Do not dry the blanket with a hair dryer.
Do not operate the electric blanket while it is damp or wet.
Carefully inspect the electric blanket after each wash: if you suspect it may be damaged, avoid using it and bring it to
the technical assistance centre for a check-up.
The manufacturer shall not be held liable for any damage to objects and/or harm to persons caused by incorrect
maintenance, cleaning or washing.
HOW TO STORE THE ELECTRIC UNDERBLANKET
If the electric blanket is not used for prolonged periods, it must be stored together with this manual in its original box, in
a cool and dry place. Never put the electric blanket away while it is still hot. Always wait for it to cool down.
www.argoclima.com
MADE IN CHINA