18
V 01/12
(6) SLEEP BUTTON
1) By pressing the button once, the unit enters sleep mode and the fan speed changes to low; by pressing the button
a second time, the unit leaves sleep mode.
When activating the sleep function in Cooling mode, the temperature set increases automatically by 0.5ºC every
half hour for the next 2 hours: it then remains stable for the rest of the night.
2) Each time the electricity power supply is disconnected, sleep mode is cancelled. To restore, simply press the
SLEEP button once. Each time the appliance is switched off, sleep mode is cancelled. To restore, simply press
the SLEEP button once.
(7)
TIMER BUTTON (TIMER-ON/TIMER-OFF)
1
）
Timer-on (auto-on)
When the appliance is on stand-by, set the time remaining before the unit is to switch on can be set:
•
Select a number of hours from "1" to "24".
•
Press the TIMER button consecutively and the number of hours increases by 1 each time it is pressed, up to 24.
•
Press the Power button before the time expires and the setting will be cancelled and unit will start operating.
2
）
Timer-off (auto-off)
When the appliance is on, set the time remaining before the unit is to switch on can be set:
•
Select a number of hours from "1" to "24".
•
Press the TIMER button consecutively and the number of hours increases by 1 each time it is pressed, up to 24.
•
Press the Power button before the time expires and the setting will be cancelled and unit will switch off.
(8) AUTO BUTTON
Automatically regulates fan speed to 3 possible levels:
Low
（
LO
）
Medium
（
MED ) High
（
HI )
(9) HIGH BUTTON
: selects high fan speed, HI appears on the display.
(10) MED BUTTON
: selects medium fan speed, MED appears on the display.
(11) LOW BUTTON
: selects low fan speed, LO appears on the display.
OPERATION WITHOUT A REMOTE CONTROL
If the remote control is not working or has been lost, the button on the control panel can be used.
1. "POWER" BUTTON
(SWITCHING ON/FUNCTION SELECTION (Cooling / Heating (NOT ACTIVE)/ Switching off)
By pressing this button consecutively on the control panel, the unit is activated, cooling mode is selected, heating mode
(NOT ACTIVE)
is selected and finally the appliance is deactivated.
For Dehumidification mode, always use the remote control.
