Argo 387005002, Technical Data & Service Manual

Page: 19 / 30

5-18 Indoor Unit Jumpers Configuration
Unit is shipped with jumpers set
according to the following table:
JUMPER STATUS
JP1 open
JP2 open
5-19 Outdoor Unit Jumpers Configuration
Unit is shipped with jumpers set
according to the following table:
JUMPER STATUS
JP1 open
JP2 closed
JP3 open
5-20 Contacts for Building Automation
5-20.1 Input Contact (J11 - green)
The status of this input affects system operation according to the following:
Contact OPEN : system does not operate (always OFF) – inputs from wireless remote controller are not processed
Contact CLOSED: system operates in the normal way according to the inputs coming from wireless remote controller
INPUT CONTACT
CONNECTOR J11 GREEN
STATUS: CLOSED
OUTPUT CONTACT
CONNECTOR J20 RED
USED TO SIGNAL
AN ALARM CONDITION
5-20.2 Output Contact (J20 - red)
This connector is directly tied to the contact (normally open) of a power relay which activates every time
the following alarm condition occur:

RAT damaged

ICT damaged

Communication error

Fault on outdoor unit
In this case when alarm happens, on poles 1 and 3 of J20 connector, 220 VAC-50Hz are available.
Max electrical load:
1A- 240VAC
19