V - 06/16
19
Control panel and display
ON/OFF button (STAND-BY)
Pressing the “
” button will cause the power LED to light up, and the appliance will begin to operate at low
heating power (1300W). Press the button once again to lock all functions and place the unit in stand-by. The
power LED will switch off. To switch off the fan heater completely, place the on/off button in the “0” position.
MODE button (power/mode switch)
When the appliance is operating at the low heating power setting (1300W), touch the “
” button to switch to
COMFORT mode (2500W) and the LED "2500" will turn on. Press the button once again to switch to ECO
mode (1300W) and the LED "1300" will turn on. The heat power/mode can also be adjusted using the remote
control by pressing the “
” button.
SWING button
When the unit is running, press the “
” button to automatically direct the air to the left or right. The LED is
switched on simultaneously.
Press the button once again to interrupt the swing and the LED will turn off.
TIMER button
While the appliance is running, press the “
” button to set the time. You can programme an operation time
from 30 minutes to 7½ hours. The time increases by 30 minutes each time you press the button. At the same
time, the display shows the set time. The appliance will switch off automatically at the end of the set time.
The appliance is equipped with an anti-tipping device which interrupts operations when the product is tilted.
Do
not position the appliance on its side or upside down.
REMOTE CONTROL