ARG - ABRAHAM REYNOLDS GROUP di Luciano De Pace & C. S.A.S.
Viale Paradiso 19 - I - 10040 RIVAROSSA - (TO) Tel . : +39-011-9700112 - Fax. : +39-011-9700112
E mail : [email protected] Web: www.argweb.eu Web DYNAMO : www.dynamo-jet.it
16 - Repeat steps 1 to 15 for the other tail plane.
17 - Insert the joiner (item 12) in the hole of the fuselage and mount the tail plane .
18 - made for each stabilizer a pre-drilled hole Ø 1.8 up to pierce the joiner positioned approximately 10 mm from the root rib.
19 - Using the self-tapping screws (item 31) block the tail plane.
20 - Remove the joiners and finish with sand paper the drilling area to eliminate any surplus of material.
WING ASSEMBLY
INSTALLATION OF LANDING GEAR
The DYNAMO is provided for the installation of electric retracts, we suggest ELECTRON retracts (See Pos 50-51-52-53-54) but
you can also mount other types of landing gears with similar dimensions.
To install the landing gear proceed as follow:
1 - Using a Dremel with cutting disc open the landing gear hole and finish with sand paper the edge
2 - Put in the hole of support plate, Nr.4 blind nut with the correct diameter for the landing gear, and glue it with EP30
3 - When dry ,mount the landing gear and take care to pass the cables or air tube in the correct hole