background image

 

Page 2 

 

 

 

INSTALLATION INSTRUCTIONS: 

Mounting the Transmitter - 

The ARG FM transmitter is a universal unit designed to be compatible with most makes 

and models of televisions or audio devices.  The transmitter can be mounted anywhere within the range of the length 
of  cable  being  used  for  the  audio  connection  including  on  the  TV/audio  device.    If  mounting  the  transmitter  on  a 
device, make sure not to cover ventilation grates or interfere with the functionality of the equipment.  The transmitter 
is designed with slots on the back that hook onto the included mounting bracket. For your convenience, screws with 
wall anchors and hook-and-loop fasteners are provided to attach the mounting bracket to a variety of surfaces.      

Attaching the Antenna 

– 

Place the rubber antenna into the receptacle marked “ANT” on the top of the transmitter 

(Diagram  #12) and  tighten  the  screw  until  it  seats  into place.    The  antenna  can  be  set  to  any  angle  or  rotated  360 
degrees to fit into available space. 

Powering the Unit - 

Plug one end of the 9VDC power supply (included with the unit) into a 110V power outlet.  Plug 

the other end into the terminal on the side of the transmitter marked “DC/9V Input” (#8 on the diagram).  When both 
ends of the cord are plugged in, the transmitter will turn on.  

 

 

Summary of Contents for ARG-OM-006-2014

Page 1: ...ource Group Inc 405 Main Ave W Unit 4G West Fargo ND 58078 2013 Audio Resource Group Inc All Rights Reserved www argaudio com Fitness Entertainment Solutions FM Transmitter Manual and User Guide ARG OM 006 2014 ...

Page 2: ... that hook onto the included mounting bracket For your convenience screws with wall anchors and hook and loop fasteners are provided to attach the mounting bracket to a variety of surfaces Attaching the Antenna Place the rubber antenna into the receptacle marked ANT on the top of the transmitter Diagram 12 and tighten the screw until it seats into place The antenna can be set to any angle or rotat...

Page 3: ...ks like this XXXXX Diagram 10 Make sure the ends of the cable are securely connected to the ports on both ends These plugs will usually click into place when properly inserted NOTE these cables are usually shipped with clear plastic protective end covers which need to be removed before connecting the cable Digital Coaxial Input Diagram 11 The output terminal for this connection looks like a standa...

Page 4: ...T UP arrow 7 Note The factory output level is 08 If the level is too low it will be difficult to hear the sound if set too high the sound will be distorted and hard to understand This setting is also useful for evening out the volumes of different televisions in a multiple device system as TV channels are broadcast at different volume levels LIMITED WARRANTY Audio Resource Group Inc warrants all n...

Reviews: