Arfa 1018S, Instruction Manual

Page: 6 / 36

job better and be safer at the rate for
which it was designed.
(3). USE RIGHT TOOL. Don’t force tool
or attachment to do a job for which it was
not designed.
(4). SECURE WORK. Use clamps or a
vise to hold work when practical. It’s safer
than using your hand frees both hands to
operate tool.
(5). MAINTAIN TOOLS IN TOP
CONDITION . Keep tools sharp and clean
for best and safest performance. Follow
instructions for lubricating and changing
accessories.
(6). USE RECOMMENDED
ACCESSORIES. Consult the owner’s
manual for recommended accessories.
The use of improper accessories may
cause hazards.
(7). AVOID ACCIDENTAL STARTING.
Make sure switch is in “ OFF” position
before plugging in power cord.
(8). DIRECTIONOF FEED . Feed work
into a blade or cutter against the direction
of rotation of the blade or cutter only.
(9). ADJUST AND POSITION the blade
guide arm before starting the cut.
(10). KEEP BLADE GUIDE ARM TIGHT ,
A loose blade guide arm aill affect sawing
accuracy .
(11). MAKE SURE blade speed is set
correctly for material being cut.
(12). CHECK for proper blade size and
type.
(13). STOP the machine before putting
material in the vise.
(14). ALWAYS have stock firmly clamped
in vise before starting cut.
(15). GROUNDALL TOOLS . If tool is
equipped with three-prong plug, it should
be plugged into a three-hole electrical
receptacle. If an adapter is used to
accommodate atwoprong receptacle, the
adapter lug must be attached to a known
ground. Never removed the third prong.
C. ADJUSTMENT :
MAKE all adjustments with the power off.
In order to obtain the machine. Precision
and correct ways of adjustment while
assembling, the user should read the
detailed instruction in this manual.
D. WORKING ENVIRONMENT:
(1). KEEP WORK AREA CLEAN.
Cluttered areas and benches invite
accidents.
(2). DON’T USE IN DANGEROUS
ENVIRONMENT. Don’t use power tools in
damp or wet locations, or expose them to
rain. Keep work area well-lighted.
(3). KEEP CHILEREN AND VISITIORS
AWAY. All children and visitors should be
kept a safe distance from work area.
(4). DON’T install & use this machine in
explosive, dangerous environment.
E. MAINTENANCE:
(1). DISCONNECT machine from power
source when making repairs.
(2). CHECK DAMAGED PARTS . Before
further use of the tool, a guard or other
part that is damaged should be carefully
checked to ensure that it will operate
properly and perform its intended function
- - 4