YAK 55 -
ITEM CODE:BH111.
Instruction Manual
4
1. Install the rubber grommets and brass
eyelets onto the aileron servo.
INSTALLING THE AILERON SERVOS.
REPLACEMENT SMALL PARTS
1. Aluminium landing gear.
3. Spinner.
2. Wheels.
5. Fuel Tank.
Aileron
Bottom side
2) Using a modeling knife, remove the cov-
ering at possition show below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
6. Tail gear set.
4.Engine mount ply of wood .
1.
3.
4.
2.
5.
6.
