The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can press DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
successfully switched.
Power on/off switch
Wheel button
Dpi button
Mouse
Battery cover
Receiver
Internet Forward & Backward button
Switch scroll
mode button
Receiver
Congratulations on your purchase of the most innovative wireless mouse. With an incredible
sensitivity to surface details and high tracking speed than other mice, the mouse can track
reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will
make you more productive and more comfortable
a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off switch on the bottom of the mouse is ON.
e. The Low Power LED will be on for 6 seconds if the mouse power is on.
Introduction
A. Hardware Installation
2.4GHz (distance 6~8m), 16 Channels/2
24
ID
Using state-of-art technology. High tracking speed and sensitivity.
Hyper-Fast Scrolling
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
800/1600 dpi switchable button.
Ergonomic design.
2*AA Alkaline batteries included.
Features
+
-
+
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2 *AA batteries
3. Communication : The mouse & the receiver
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
2. Connect the receiver
PC
USB port
1. Insert the batteries
Pull out
the receiver
a. Turn on your PC.
b. Connect the receiver to USB port on PC.
Low power
indicator
Mouse: RATED VOLTAGE: 3V RATED CURRENT: 100mA
