4 of 6
2.
Connect the receiver
a.
Turn on your PC.
b.
Plug the receiver into the USB port on PC.
3.
Communication : the mouse & the receiver
a.
Make sure the Power On/Off Switch on the bottom of the mouse is ON.
b.
The mouse and receiver have been successfully linked when the cursor’s
movement mimics that of the mouse.
(ǃ) Note:
The unit offers a strong power saving management. Once the mouse
accesses the sleeping mode, "to click any button of the mouse" is
compulsory to wake it up.
Power On/Off:
To save energy for long period of non-usage, switch the On/Off button to
Off position to turn off the mouse.
Users can press the DPI button to change the resolution. The LED will
flash once or twice when dpi has been successfully switched to 800 or
1600 dpi
(ǃ) Note:
The mouse, while working if encountering any interference, will
automatically source out with the receiver and transfer to another free
channel. During the transferring, the cursor movement may have a second
delay.
(ǃ) Note:
The Red LED on the mouse top is the low battery power indicator. Its 6-
seconds flashing indicates that the batteries inside the mouse are needed to
be replaced.
