15
Stability Control Switch
The Idle Up switch (Stunt/Normal) is used to set the throttle to full power in-
dependent of the position of the throttle
stick. When in idle up any throttle stick
movement above mid point engages
positive pitch on the main rotor, any
stick movement below mid stick pro-
duces negative pitch on the main rotor
allowing you to fly inverted. For 3D
flight, Idle Up should be engaged once
you have taken off in Normal mode
and established a stable hover.
Use
caution, engaging Idle Up brings the
main rotor to full power!
To put the helicopter into stable
mode (6-axis), locate the Stable
Mode Switch on the top left of
the transmitter and flip it to the
ON position. In this mode, the
pilot will experience stable yet
agile flight with the helicopter
returning to level flight when the
cyclic stick is returned to neutral.
Idle Up Switch (Stunt)
The Throttle Hold switch will shut
the motor off in either normal or idle
up mode and should be engaged if
a crash is anticipated to minimize
damage. It can also be used if you
are working on the helicopter while
it is powered up to prevent possible
injury from the rotor.
Throttle Hold Switch
Summary of Contents for OPTIM 300 CP
Page 33: ...33 NOTES...
Page 34: ...34 www Ares RC com 2014...
