QUICK-START GUIDE
For more great Ares products, just visit: www.Ares-RC.com
For more great Ares products, just visit: www.Ares-RC.com
5
Slot the piano wire spacer bar into
position at the front of each float
noting that the strut locates in the
rearward slot behind the spacer
bar. Moving to the back of each
float, slot the remaining strut into
position noting that it locates in the
rearward slot, behind the spacer
bar. Lock the struts and spacer
bars into position with the saddle
clamps and screws.
6
Your floats are now assembled
and ready to be attached to the
fuselage.
7
Glue the U-shape water rudder
mount over the base of the rudder
as shown, noting that it must be
located as far forward as possible
with the collet retainer positioned
at the front.
8
Slot the rudder shaft into the collet
at the top of the water rudder and
tighten the grub screw to clamp it
in position.
9
Slot the other end of the shaft
into the collet on the water rudder
mount and tighten the grub screw
to clamp it in position.
