background image

24

Warranty, Support & Service AU

30 Day Warranty

Model Engines (Aust.) Pty. Ltd. warrants this product to be free from defects 

in materials or workmanship for 30 days from the date of purchase and 

will repair, replace or refund the purchase should the product prove to be 

defective.
This warranty does not apply to any unit or system or component which has 

been dropped, damaged in a crash, improperly installed, assembled, handled 

or abused.
Model Engines (Aust.) Pty. Ltd. reserves the right to void the warranty if the 

product has been altered or modified, has had a foreign part added, has 

been misused or not used for the purpose for which it was designed, has 

been used near or in salt water, has been water damaged, or if the damage 

has been caused by the customer’s use of the product.
Under no circumstances does Model Engines (Aust.) Pty. Ltd. warrant nor 

will the customer be entitled to consequential or incidental damages. Model 

Engines (Aust.) Pty. Ltd. assumes no responsibility for any other damage, 

inconvenience or other claims whatsoever.

Lodging A Claim

To lodge a claim, present the goods to your place of purchase (retailer where 

you bought the product) with your original purchase receipt and a written 

explanation of the defect.
The place of purchase (retailer where you bought the product) will then 

contact Model Engines (Aust.) Pty. Ltd. for a Return Authority number and will 

return the item for warranty assessment to Model Engines (Aust.) Pty. Ltd. 

Items delivered to Model Engines (Aust.) Pty. Ltd. for warranty assessment 

without a Return Authority number will be returned to sender.
The warranty process may take up to 14 business days from the date of 

receipt. Model Engines (Aust.) Pty. Ltd. must assess each item and if warranty 

applies must repair or replace the item at its discretion and return it to the 

place of purchase (retailer where you bought the product).
Goods presented for warranty may be replaced by refurbished goods of the 

same type rather than being repaired. Refurbished parts may be used to 

repair the goods.
If the product is proven to be defective the cost and expenses relating to the 

delivery of the goods to Model Engines (Aust.) Pty. Ltd. will be borne by Model 

Engines (Aust.) Pty. Ltd.
The benefits of this warranty are in addition to other rights and remedies of 

the customer under any law to which this warranty relates.
Our goods come with guarantees that cannot be excluded under the 

Australian consumer Law. You are entitled to a replacement or refund for a 

major failure and for compensation for any other reasonably foreseeable loss 

or damage. You are also entitled to have the goods repaired or replaced if the 

Summary of Contents for AZSQ3350



























Reviews: