QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
1
Remove the components from
the box and ensure you have the
following parts:
• Fuselage assembly
• A left- and right-hand wing
panel
• Tailplane fin and rudder
• Steel wing spar
Required to Complete
Before you commence the final assembly of your Alpine 1200 you will need the following
equipment and tools:
• 4-channel 2.4GHz air transmitter and receiver combo – Hitec compatible IKONNIK KA-6
recommended from J. Perkins stockists (KNNA1000 / Mode 2 or KNNA1000M1 / Mode 1).
• 1000mAh 20C 2S LiPo with HCT plug – Ares pack recommended from J. Perkins stockists
(AZSA1631).
• 2S LiPo charger – Radient Primal recommended from J. Perkins stockists (RDNA0042).
• Self-adhesive hook and loop tape.
• EPO foam glue – Multiplex Zacki Elapor Foam recommended from J. Perkins stockists
(25592727).
• Phillips screwdriver.
• 10mm box spanner.
2
Connect the aileron servo plug
for the left-hand wing panel
into its mating fuselage socket
making sure to push it fully home
whilst maintaining the correct
orientation / polarity.
3
Slide the left-hand wing panel
fully into the fuselage, preceded
by the aileron servo lead which
is sandwiched between wing and
fuselage.
