QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
Full manual available to download from: www.Ares-RC.com
5
Plug the wires into the respective
sockets on your receiver noting
that the single-pin connectors
should be attached to the ‘signal’
pin, usually reserved for the
yellow, orange or white wire.
6
Secure your receiver to the upper
frame using hook and loop tape
and secure the aerial(s).
7
Note that only end pin receivers
can be secured to the upper
frame due to the proximity of the
body.
8
Install the downlink antenna
noting that the Crossfire should
never be powered ON without the
antenna connected as this can
damage the video transmitter
circuitry.
