EN
Step 1: Supply power to your Chime and Doorbell.
Pair via pressing Doorbell button
(not included)
USB compatible
charger(DC5V)
Step 2: A short press on the RESET button on the Chime, and you will see
the indicator flashes blue, indicating the device is in pairing mode.
Step 3: Press the doorbell button. When successfully paired, a voice or tone
will be played and the Chime LED status indicator will be in solid blue.
Note: The Doorbell and Chime have been configured before leaving the
factory. If the Chime isn’t paired by default, please refer to the
following instructions to pair it with the doorbell camera.
Reset Button
LED Indicator
Pairing the Chime
2
