EN
.
General setting
Set upbrightness:
1. Press
Menu
button on the monitor screen, select
and press
OK
to
enter the interface.
2. Press UP and DOWN direction buttons to adjustbrightness.
Set up time:
1. Press
Menu
button on the monitor screen, and select
> Time setting
.
2. Press direction buttons to change date, time and time displaying mode.
Set up language:
1.
Press
Menu
button on the monitor screen, and select
>Language.
2. Select the language you need.
Set up sleep mode:
You can set up sleep mode to increase standby time.
1.
Press
Menu
button on the monitor screen, and select
> Sleep mode.
2. Select sleep mode as 1 minute, 5 minutes, 10 minutes, 30 minutes, 60
minutes or off.
Turn on and off status indicator:
If you turn on the status indicator, you can get the working status of
the camera. You can also turn off the status indicator, if you think it will
affect your baby’s sleep.
Press
Menu
button on the monitor screen, and select
>
(Or Press
Menu
button，select
> Light > Status light
.)
SD card:
1. Press
Menu
button on the monitor screen, and select
> SD card
management.
Then you can view the total capacity and remaining
capacity of your SD card.
2. (Optional) You can format the SD card as you needed, but make sure that
the important data is backed up.
Upgrade:
Make sure your camera is connected to a the 2.4 GHz Wi-Fi.
You can upgrade your camera when the upgrade alarm appears. Or Press
Menu button on the monitor screen, and select
> Device information
to
check whether there is a upgrade.
Low battery alarm:
When the camera is low on battery, the low battery alarm will appear on the
monitor screen. Please charge the monitor as soon as possible.
