22
English
4. Product details
5. Commissioning and use
Connect the power cord to a properly wired power socket. First proceed as
described in Section "3 Commissioning".
Ensure that the power plug has been inserted. Insert up to four toast slices into
the toasting slots. Turn the "rotary switch provided for adjusting the degree of
toasting" to the desired level and press the "slide switch" down until it snaps in
place. The heating elements warm up and the toasting process begins.
Once the process is complete, the "slide switch" automatically jumps back to its
original position. This means that the toasting process has finished and the bread
slices can be taken out carefully.
If the degree of toasting is not satisfactory, adjust it using the "rotary switch pro
-
vided for adjusting the degree of toasting" and repeat the toasting again. In this
case, ensure that the toast does not get burnt. If the desired degree of toasting
has already been attained, you may then end the process at any time by pressing
the "STOP" button.
Toast slot
Slide switch
"REHEAT" button
"STOP" button
Rotary switch provided for adjusting the
degree of toasting
"DEFROST" button
