21
English
4. Assembly
1.
Push the motor shaft (2) as far as it goes into the base unit.
2.
Place the jar (3) on the base unit (1). Now you have the option of using the
existing jug (3) as a juice container or to use a separate container. If you
want to use a separate juice container, you need to attach the shaft extend
-
er (5) and then mount the juice container (6). If you do not want to use a
separate juice container but want to use the jug (3), skip parts 5 and 6.
3.
Then place the filter (7) and the pressing cone (8) on the appliance.
5. Usage
Take the appliance out of the package and remove all the packaging material.
Place it on a flat and firm surface.
•
Connect the plug to a properly installed socket.
•
Remove the pressing cone cover (9) and the lid (10).
•
Cut the desired citrus fruit into two halves before squeezing them.
•
Hold the citrus fruit with one hand and the squeezer with the other hand while
pushing down on the pressing cone with half the citrus fruit.
Note: The pressing cone starts to turn automatically. Do not press too hard on the
cone because the appliance stops if the pressure is too much.
After usage, remove the power cord from the socket and then clean the appli
-
ance.
Note: Ensure that you refrigerate the juice after extraction. Remember that the
juice should not be stored for more than one day. Do not keep the juice in metal
containers because the acid in the juice may affect the surface and impair the
taste.
