5/8
USER'S MANUAL
Remove the retaining spring ring and insert the
gobo, taking care to keep the dichroic coating
towards the rear side of the gobo holder: this will
avoid scratching the image when the spring is
removed to replace the gobo.
Insert the retaining spring ring all the way down
into the housing, in order to firmly lock the gobo.
Mount the gobo holder inside the projector, on the
support frame, matching the holder hooks with the
frame openings.
Finally slide in the top cover and fix the Allen
screw to the rear panel.
OPERATION
By supplying voltage to the projector, the LED
source turns on by projecting the image of the
gobo; you can turn the gobo rotation on and off
using the button switch located on the right side of
the rear panel of the projector: each time you
press the switch the rotation is alternately enabled
and disabled.