background image

3/8

USER’S MANUAL

Product Data

Operation

This device contains AAA batteries that shall be stored and disposed properly.

• DO NOT expose the device to moisture.

Safety & Warnings

Protocol

Operation Voltage

Transmission Frequency

Transmission Range (free field)

Protection Type

Dimming Range

Dimension

Protection Grade

ZigBee 3.0

4.5V(3xAAA battery)

2.4GHz

30m

IP20

0.1%-100%

120x55x17mm

IP20

Magnetic Bracket

ZigBee RGB remote based on ZigBee 3.0

Enables to control RGB lighting devices

High sensitive & high stable touch color wheel, fast & precise color control

Battery powered remote with low power consumption

Enables to pair ZigBee lighting devices through touchlink commissioning

Supports find and bind mode to pair with ZigBee lighting devices

Supports 4 groups for binding max. 30 lighting devices

2.4 GHz global operation

Transmission range up to 30m

Compatible with universal ZigBee Gateway products

Compatible with universal RGB ZigBee lighting devices

1.This ZigBee RGB remote is a wireless transmitter that communicates with a variety of ZigBee

compatible systems. This transmitter sends wireless radio signals that are used to remotely control a

compatible system.

2.This ZigBee remote supports 4 groups for binding max. 30 lighting devices and enables to control

RGB ZigBee lighting devices.

ZigBee Clusters Supported by This Remote Are As Follows:

Input clusters:

Basic

Power Configuration

Identify

Diagnostics

Output clusters:

Identify

Group

Scene

On/off

Level control

Ota

Color control

Summary of Contents for LC9182SZG-RGB









Reviews: