AV Video System
Installation And Software Manual
Arecont Vision Proprietary And Confidential
p.8
Low Sharpness
If you believe image sharpness is low:
•
Check if the lens is in focus
•
Check if the lens provides sufficient resolution for a mega-pixel camera
•
Increase compression ratio
•
Check if the lens iris is fully open or closed down substantially. For best resolution and depth of
field the iris – depending on lens make – should be closed by 2-3 F-stops
Regulatory Compliance
FCC Compliance Statement
AV2100 and AV3100 has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
1.
It is suggested that the user use shielded CAT6 cables to comply with FCC rules.
2.
It is suggested that the user use power-over-Ethernet supply
3.
To comply with FCC rules when using auto-iris with AV2100 it is also suggested using a ferrite
common mode choke Fair-Rite # 0444164281 with 1 ½ turns place on the auto-iris lens cable three
centimeters from the lens.
Related Documentation
1.
AV Developer’s Guide
2.
AV Software Developer Kit Manual
3.
AV 2100, AV3100 and AV3130 Network Camera Specification
4.
AV Video Software Reference Manual
5.
AV Video Software Installation Guide
Terms and Conditions of Sale
1. Terms and Conditions.
This sale is subject to the terms and conditions set forth below, which
supersede any and all terms and conditions set forth in any documents issued by Purchaser, including
Purchaser’s purchase order. ANY ADDITIONAL, DIFFERENT OR CONFLICTING TERMS AND
CONDITIONS HEREBY ARE OBJECTED TO BY ARECONT VISION, LLC (“AV”), AND SHALL BE
OF NO FORCE AND EFFECT. No waiver or amendment of these terms and conditions shall be binding
on AV unless made in writing expressly stating that it is such a waiver or amendment and signed by AV.
2. Limited Warranty.
AV warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a)
each Product shall be free from material defects in material and workmanship for a period of twelve (12)
months from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products
will materially conform with the specification in the applicable documentation; (c) all licensed programs
accompanying the Product (the “Licensed Programs”) will materially conform with applicable
specifications. Notwithstanding the preceding provisions, AV shall have no obligation or responsibility
with respect to any Product that (i) has been modified or altered without AV’s written authorization; (ii) has
