INSTALLATION
17
Note:
You can press and hold the “Reset” button for 3 seconds to
force the RAID storage AC power on or off.
When you are finished installing the ARC-8050T3 RAID storage,
you can set up the RAID volume using McRAID storage manager
or LCD to set up RAID volumes.
5.2 Mac Users
5.2.1 Install the MRAID Software
This section describes detailed instructions for installing the
Areca Mac driver & utility for the ARC-8050T3 on your Apple
Thunderbolt capable machine. You must have administrative
level permissions to install macOS driver & utility. This can be
done in just a few steps!
1. Download the install_mraid installer from the website at
"
http://www.areca.com.tw/support/s_ thunderbolt/thunder-
bolt.htm
", the file name begins with “install_mraid” followed
by the version control.
2. Double-click on the zipped file that comes from the website to
add the installer on the Finder.
3. Launch the installer by double-clicking the install_mraid on
the Finder. The MRAID Installer opens. Click on the "
Next
"
button to begin the installation.
4. The MRAID Installer opens. Click on the "
Next
" button to
begin the installation.
3. ARC-8050T3 RAID storage automatically turns off when the
computer to which it is attached sleeps or is disconnected.
