LS-860 Quick Installation Guide
7
The system automatically scans and lists the network
cameras connected to the Media Station once entering
the [
Network device manager
] page. You may click
Refresh button to scan again. Click Login button and the
login authentication dialog pop out. Enter the username
and password of the camera to complete the
authenticationand change the status to [
OK
]. Then the
camera is ready for video input selection. Select the
desired camera by its IP address. For video source of
encoder, enter RTSP or RTP connection URL.
Setup
Step 1: Set up video input name, video source, PTZ control in [
Video inputs
] of [
Media I/O
].
The Capture source can be the video port [ ] and [ ] with HDMI.
If the desired video source is network camera, a login authentication with the camera is
required firstly in the [
Network device manager
] setup tab of [
Media I/O
].
