User’s Manual
–
A
REBO
S Slow Juicer 200W stainless steel
4
3. Assembling
1.
Position the chamber properly on the product body.
2.
Position the filter and filter rack with the Triangle mark inside the chamber.
3.
Install the Rotor firmly inside the slow juicer
’
s chamber. Ensure that it has been firmly
positioned inside.
4.
Place the Top Cover on top of the chamber while aiming for the UNLOCK MARK on the Main
Unit.
5.
Fasten the Top Cover to the LOCK MARK to hold it firmly in place.
4. Usage
Simply follow the instructions provided below when using the machine.
1.
After assembly correctly, please turn on the machine to run several seconds for warm up
and make sure in good condition.
2.
Best use with fresh fruits which is rich in water and nutrition.
3.
Wash and cut fruits in sizes that can fit into the tube.
4.
Remove the pits and hard core from the fruits.
5.
Put food materials into feeding tube and slightly press down slowly using the fruit
pusher.
When the machine is stopped during juicing:
1.
Did you use more than 15mins? If Yes, wait for 5 minutes
for the slow juicer to cool down. Press and hold the
“
R
”
button for 2-5 seconds to push the fruits upwards.
2.
Press on to resume juicing.
NOTES:
•
Do not force in the fruits during juicing to prevent damage to the Auger
and Micro-Mesh Filter.
•
This machine is not suitable for juicing cereal and sugarcane.
•
Do not juice continuously for more than 15mins.
