User’s Manual – AREBOS Solar Shower with thermometer
6
4.
Use
4.1 First Use
1.
Turn the shower handle to
FULL ON HOT
position.
Note:
Filling the tube with the valve in hot position ensures no air pockets are trapped in
shower. This procedure is used for first usage only.
2.
Turn on the water supply to the garden hose to fill the shower. It will take about 5 minutes to
fill up the shower.
3.
When water flows from the shower head, turn the shower handle off. Turning shower handle
off makes water begin to heat in the tube.
4.
Depending on sunlight and outside temperature, the shower will take about three hours to
fully heat water.
5.
Warning:
To avoid scald, pay attention to turning the shower handle to
cold water
(blue)
direction before using the shower. Then set to desired temperature.
4.2 Notes on use
Attention: If you have not used the solar shower for more than 3 days, we recommend that
you run the water for 2 minutes before use to replace the water in the solar tank. Standing
water in a warm environment can be a centre for dangerous bacteria!
Attention: Standing water in the tank no longer corresponds to drinking water quality!
Caution: The water in the solar tank can become hot due to sunlight. We therefore
recommend that the cold/warm single-lever mixer tap is always positioned in the middle
position (between hot and cold) at the beginning. Then it can be turned to the desired
temperature.
1.
Turn the cold/warm single-lever mixer tap to the "ON" position and you can enjoy your
"solar" heated water. Note: The water supply must be turned on for the shower to work.
2.
turn off the water supply to the shower when you are finished.
