User’s Manual
–
A
REBO
S Drywall Sander
10
•
DO NOT USE THE SANDER WITHOUT A PROPER ABRASIVE PAD INSTALLED (to prevent severe
damage to the work).
The replacement of grinding disk
•
The output shaft is inserted into the adhesive disc center with an angle wrench and turned
clockwise into the hex hole. At the same time, the hands hold the adhesive disc grinding.
SPEED ADUSTMENT
•
The grinding of the grinding disk rotation speed can be adjusted according to different
conditions and grinding quality requirements.
The Drywall Sander is equipped with a variable speed control. The speed is adjusted by
turning the control knob. The control knob is numbered "min" through "max" with "min"
being the slowest speed (approximately 1000 RPM) and "max" being the fastest speed
{approximately 2100 RPM).
Use the higher speed settings for fast stock removal. Use the lower speed selling to reduce removal
rate for more precise control
